Why is the boiler blowing fuses?

Unless a clear obvious component is burnt out and you can see it is faulty, the best way of determining which component is faulty would be to...

  1. Check the electrical polarity of the appliance and fuse rating is correct
  2. Turn off appliance, remove all mains voltage components from the PCB, including any room stats or wiring centres, and link out external controls on the board
  3. Remove transformer if fitted to PCB. May look visually damaged or you can test for ohms or continuity depending on model. Please call our Technical Support helpline on 0330 123 3366 if you do not know what readings you should have.
  4. If the transformer is ok, turn the power back on to see if a fuse blows. If it does, PCB will be faulty, If not, start re-introducing each component one at a time in order of operation e.g. transformer, pump, fan and then external controls to see which one blows fuse.

Send enquiry

Send us an enquiry via our website and we'll get back to you as soon as we can.

Register guarantee

Register your Worcester Bosch product here by following a few simple steps.

Manuals & brochures

Lost the instructions? Don't worry. Download PDF copies of product use manuals, instructions or brochures here.

Customer Support

Find out about our service plans and book your next appointment.

Customer relations

Please contact our customer relations team if you have any feedback, comments or criticism of our products or services.